Sample Concentrator รุ่น NDK200-2N ยี่ห้อ MIULAB

Sample Concentrator รุ่น NDK200-2N ยี่ห้อ MIULAB

View More

32,000.00 ฿



Product Description

JINDAL nitrogen sample concentrator SMI-NDK200-2N is mainly used for concentrating or preparing sample in batches. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously.

Latest Ergonomic Features:
  • The position of gas needle in air chamber plate can be adjusted to suit for different types of tubes
  • The height of the air chamber plate can be adjusted. The length of a standard gas needle is 150mm
  • Standard configured air cavity and adjustable bracket
  • Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste
  • The entire equipment can be put into ventilation cabinet when the concentration sample is in toxic solvents
  • Built in overheat protection, automatic fault detection and fault beep alarm devices
  • LED displays immediate temperature and diminishing time. Operation is simple and convenient
  • Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration
Technical Parameters:
  • Temp. Control Range: R.T.+5℃ ~150℃
  • Temp. Setting Range : 5℃ ~150℃
  • Temp. Stability@40~100℃ : ≤±0.5℃
  • Temp. Stability@100~150℃ : ≤±1℃
  • Block Temp. Uniformity@100℃ : ≤±0.5℃
  • Block Temp. Uniformity@150℃ : ≤±1 ℃
  • Temp. Display Accuracy : 0.1℃
  • Heating Speed : ≤30min (40℃ to 150℃)
  • Time Range : 1min ~99h59min or continuous
  • Needle Plate Max. Lift Stroke : 285mm
  • Gas-in Joint Outer Diameter : Φ7mm
  • Nitrogen Pressure : ≤0.1MPa
  • Nitrogen Flow Rate : 0 ~10L/min
  • Needle Length : 150mm
  • Sample Capacity : 2 standard blocks
  • Voltage : AC 220V / AC 110V, 50/60Hz
  • Power : 400W
  • Fuse : 250V, 3A/6A, Ф5×20
  • Dimension (W x D x H) : 200 x 260 x 525mm
  • Net Weight : 6.1kgs
Common Configuration:
  • Optional blocks from DT01A to DT16A can be interchanged easily
  • Optional regulating valve